SURFACE MOUNT PROCESS
  • Home
  • Articles
    • A GUIDE TO EFFECTIVE STENCIL DESIGN
    • SOLDER PASTE PRINTING PROCESS
    • SOLDER PASTE INSPECTION PROCESS
    • COMPONENT PLACEMENT PROCESS
    • REFLOW SOLDERING PROCESS
    • POST-REFLOW AOI PROCESS
    • THROUGH-HOLE ASSEMBLY - SELECTIVE SOLDERING
    • Cleaning 'No-Clean' flux residues and other contaminants
    • Environmental Protection - Conformal Coating
    • Hand soldering and rework of surface mount components to IPC class 3
  • FAQ
    • Solder paste handling
    • Type 3 or Type 4 Solder Paste
    • Cleaning a misprinted PCB
    • Solder Paste Quality Control
    • What factors affect solder paste transfer efficiency
    • What stencil thickness should be used?
    • What is the difference between aspect ratio and area ratio of stencil apertures?
    • What squeegee speed should be used?
    • What squeegee pressure should be used?
    • What the differences between 'on-contact' printing and 'gap' printing?
    • What separation speed to use in solder paste printing?
    • What are the benefits / challenges of using halogen-free solder paste?
    • What is the best stencil aperture shape for solder paste transfer efficiency?
    • PCB delamination during reflow
    • What are the different types of reflow profile?
    • ROSE (Resistivity of Solvent Extract) testing
    • How do you validate a PCBA cleaning process?
    • Why clean a pcba that has been soldered using no-clean flux
    • How do engineered cleaning fluids such as Zestron and Kyzen work
    • How do engineered cleaning fluids affect surface tension and wetting angle?
    • How does the pH level affect engineered cleaning fluids?
    • How do mixed-bed and carbon filters work in PCB cleaning systems?
    • What are the risks of using ultrasonics to clean PCBA's?
    • What are the differences between 'Water-soluble' and 'No-clean' flux?
    • What is the difference between ionic and non-ionic contamination?
    • What causes electrochemical migration (ECM)?
    • What are methods of masking before conformal coating?
    • How to apply conformal coating by brushing?
    • How to apply conformal coating using dipping?
    • How to apply conformal coating using spray/aerosol?
    • How do selective robots apply conformal coating?
    • What is the best method to dry/cure conformal coating?
    • What concerns are there when demasking?
    • What should be checked when inspecting after conformal coating?
    • How to check the adhesion of conformal coating?
    • Tape and Reel Packaging Standards
    • What is 'Package on Package' (POP)?
    • Stock control and component attrition
    • BOM Comparison Software
    • Comparison of SAC305 and SAC387 Lead-Free Solder Alloys
    • What is a 'Eutectic' solder alloy?
    • What does 'SMT' stand for?
    • What does the term voiding mean?
    • How is void percentage calculated?
    • How to reduce voids in QFN device ground connection?
    • Low temperature lead free solder paste
    • CAD EXTRACTION
    • How are PCB's manufactured?
    • What are the IPC standards that govern electronics manufacturing processes?
    • What are the differences between SMEMA and HERMES?
  • Contact
  • Store

Tweezers Smart SMD RC Resistance Capacitance Diode Meter Tester Auto Scan

SKU:
£49.99
£49.99
Unavailable
per item

Features: 100% brand new and high quality Small size and light weight, handheld and portable test tool. Used to measure SMD, such as Chip resistor, Chip capacitor and Chip diode devices. Auto scanning, it identifies resistor, capacitor and diode automatically. Continuity testing. When the resistance is less than 30¦¸, it will sound. It also can be operated manually. You can press the button ''FUNC'' to select one certain measuring mode. Has the function of data hold. Long press the ''FUNC'' key to turn on/ off this tester. Automatic power off after it is idle for about 10 minutes. And on this occasion, it can be recovered to use by pressing any key. Over load indication. Low battery indication. Gold-plated test pins, which can induce its contact resistance and prevent it from rusting. Specifications: Display: 3000 count LCD display Operating temperature: 0 to 40 Celsius degree Operating humidity: £¼80%RH Storage temperature: -10 to 50 Celsius degree Storage humidty: £¼70%RH Resistance measurement: Auto scanning range: 300.0¦¸ to 3.000M¦¸ Manual measuring range: 300.0¦¸ to 30.00M¦¸ Capacitance measurement: Auto scanning range: 3.000nF to 300.0¦ÌF Manual measuring range: 3.000nF to 30.00mF Item size: 17.5 * 3.1 * 1.7cm/ 6.8 * 1.2 * 0.6in Color: Green&Blck Package includes: 1 x Tester, 2 x Backup test pins, 1 x Storage box

  • Facebook
  • Twitter
  • Pinterest
  • Google+
Buy Now
© COPYRIGHT 2015. ALL RIGHTS RESERVED.