SHORT TAPE FEEDER TRAYS FOR PICK AND PLACE SURFACE MOUNT ASSEMBLY |
|
Reduce amount spent on excess stock and expensive feeders
|
Quick changeovers - Higher utilisation & less downtime
|
Organised - 5S compliant compact storage unit
|
Compatible with a wide range of pick and place machines
|
One of the many challenges Contract Electronics Manufacturers (CEMs) face in surface mount assembly is receiving components in short strips of tape instead of full reels.
This usually happens with prototype and small-batch production, where only a limited number of components are needed. Buying a full reel is often prohibitively expensive and leaves many parts unused.
At the same time, feeders are costly and take up valuable machine space, making them impractical for this type of work.
This can lead to parts being manually placed by line operators, causing quality concerns and reduced process efficiency.
This usually happens with prototype and small-batch production, where only a limited number of components are needed. Buying a full reel is often prohibitively expensive and leaves many parts unused.
At the same time, feeders are costly and take up valuable machine space, making them impractical for this type of work.
This can lead to parts being manually placed by line operators, causing quality concerns and reduced process efficiency.
INTRODUCING SHORT TAPE FEEDER TRAYS
8mm SHORT TAPE FEEDER TRAY WITH 12 LANES
|
12mm SHORT TAPE FEEDER TRAY WITH 8 LANES
|
16mm SHORT TAPE FEEDER TRAY WITH 6 LANES
|
24mm SHORT TAPE FEEDER TRAY WITH 4 LANES
|
32mm SHORT TAPE FEEDER TRAY WITH 3 LANES
|
44mm SHORT TAPE FEEDER TRAY WITH 2 LANES
|
56mm SHORT TAPE FEEDER TRAY WITH 2 LANES
|
72mm SHORT TAPE FEEDER TRAY WITH 1 LANE
|
88mm SHORT TAPE FEEDER TRAY WITH 1 LANE
|
Please note - 11mm max pocket depth on short tape feeder trays 12mm and above
Our Short Tape Feeder Trays let you load these short strips easily onto your pick-and-place machine, enabling components to be placed automatically instead of by hand.
Loading is quick and simple: just slide the tape into the slots on either side of each lane. The tray holds the tape perfectly flat, secure and straight - preventing any movement and reducing chance of pick errors.
To maximise machine utilisation, multiple trays can be preloaded offline and swapped in seconds, keeping the production line running.
Loading is quick and simple: just slide the tape into the slots on either side of each lane. The tray holds the tape perfectly flat, secure and straight - preventing any movement and reducing chance of pick errors.
To maximise machine utilisation, multiple trays can be preloaded offline and swapped in seconds, keeping the production line running.
IDEAL FOR:-
- Contract Electronic Manufacturers (CEMs)
- High-Mix, Low-Volume
- New Product Introduction (NPI)
- Prototype Builds
- Short Production Runs
|
Free Tray Holder with your first order
Order any number of Short Tape Feeder Trays and get a professional 6-Tray Holder (worth £99) free of charge! Have questions? - Email us at [email protected]
|